Philips DVDR3505/37 - Timer Recording Details; Channel Selection for Timer Recording; Channel Selection Hints

40 EN40 EN
4
Use [K / L] or [the Number buttons]
to enter the start and end time, then
press [B].
Timer Programming
2. ---
3. ---
4. ---
1. JAN/01 11:57AM --:-- E1
Date Start End CH Mode
5
Use [K / L] to select analog (“- - -”) /
digital (“DTV”) mode or external
input (E1 / E2), then press [B].
Timer Programming
2. ---
3. ---
4. ---
1. JAN/01 11:57AM 10:57PM E1
Date Start End CH Mode
To record from external input (e.g., cable/
satellite box), select E1 or E2.
Use [K / L] to select the channel number to
record.
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on this page
for more details.
e.g.) analog mode
Timer Programming
2. ---
3. ---
4. ---
1. JAN/01 11:57AM 10:57PM 10
Date Start End CH Mode
e.g.) digital mode
Timer Programming
2. ---
3. ---
4. ---
1. JAN/01 11:57AM 10:57PM DTV 125.10
Date Start End CH Mode
6
Use [K / L] to select a recording
mode.
Timer Programming
2. ---
3. ---
4. ---
1. JAN/01 11:57AM 10:57PM DTV 125.10 SP
Date Start End CH Mode
Refer to “Recording Mode” on page 35.
When “Auto” is selected as a recording mode,
the unit calculates how much time is available
on the disc and determines the appropriate
recording mode to complete recording the
program.
Timer Programming
2. ---
3. ---
4. ---
1. JAN/01 11:57AM 10:57PM DTV 125.10 Auto
Date Start End CH Mode
7
Press [OK] when all items are
entered.
Your program setting will be stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Overlap” and the overlapped program
number will appear.
8
Press [STANDBY-ON
y
y] to set a timer
programming.
TIMER RECORDING
How to select a channel number for the timer recording
Analog TV
For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV
For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
125), the channel will be decided as soon as you enter the channel number.
Digital TV
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital CATV
For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
135), the channel will be decided as soon as you enter the channel number.
minor channels
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.
[K / L] does not skip the non-existed minor channels.
E7C40UD.indd 40E7C40UD.indd 40 2007/01/15 11:19:462007/01/15 11:19:46