Digital Output 41
If you connected the Player to a Stereo using the
COAXIAL jack as shown on page 14, adjust DIGI-
TAL OUTPUT (audio) as described below. If you
are not using the COAXIAL jack, no adjustment is
necessary.
1
Press SYSTEM MENU.
2
Press 2 to select the AUDIO SETUP
PAGE, then press OK.
3
P
ress
4 to select DIGITAL AUDIO
SETUP, then press OK.
4
DIGITAL OUTPUT will be selected. Press 2.
5
P
ress
3
or
4
to select ALL or PCM ONLY,
then press OK.
Choose ALL to select the original default audio
settings as received by most Stereos.
If the sound is distorted, your Stereo may need
to receive audio in the PCM format (pulse code
modulation, contains only left and right audio sig-
nals).
Choose PCM ONLY if your Stereo is PCM-com-
patible or cannot decode MPEG-2 or DTS audio.
Refer to your Stereo manual for details.
6
Press SYSTEM MENU to remove the menus.
1,6
2-5
To Next Page
Loading...
