5
Pre-install Instruction
Left-open Right-open
Left-in
push
Right-
in push
Indoor Indoor
Indoor Indoor
Outdoor
Outdoor
Outdoor Outdoor
Left-
out pull
Right-
out pull
1. Please choose proper installation kit as per the door thickness.
2. The default installation kit is applicable for a door thickness of 38-60mm, if your door thickness
does not within this range, please feel free to contact us.
Attention
Loosen the screws by turning
them clockwise with Allen
wrench and remove the mortise
plate.
Mount the mortise plate and
fasten it with screws.
Take out the latch bolt and
rotate it to 180°, then put it
back.
1
3
2
guide plate
guide plate
Oblique
tongue
Allen wrench
Allen wrench
Step 1 | Check the door opening direction
This product can be installed on 4 types of opening directions: left-out pull,
right-in push, right-out pull and left-in push
Step 2 | Latch bolt direction change
To Next Page
Loading...
