Philips FR 930 - Preset Stations; Automatic Tuning; Manual Tuning

e Select the waveband by pressing the FM/AM key (16) until
the desired waveband appears in the display.
e Tune to a radio station or select a preset number.
The correct procedure is described in the following chapters.
e While tuning, the audio signal will be muted to eliminate
interfering background noises. When a station is found the
audio signal will be set to normal volume again.
e When STEREO appears in the display , you are receiving an
FM-stereo transmission. A disturbing noise, due to a weak
FM-stereo signal, can be suppressed by pressing FM MODE
(14). |
MONO will appear on the pee and you will hear the FM
program in mono.
A stereo station can be stored in mono or in stereo.
TUNING |
AUTOMATIC TUNING
e Press the tuning UP A or DOWN V key (7) for more than 0.5
seconds. Then release the button. The tuner will now search
until a station of sufficient strength has been found. The dis-
play shows the tuned frequency and the word TUNED
appears.
¢ If the station found is not the desired one, simply repeat this
operation.
Weak stations are skipped during automatic tuning.
They can be tuned to manually.
MANUAL TUNING
Manual tuning is useful when you already know the frequency
of the desired station (e.g. from your program guide).
With the digit keys (6)
e Press the FREQ.(uency) DIRECT key (17).
EHTER FREQUENCY will appear on the display for a few
seconds.
The display will then show 'FM—.—MHZ' or ‘AM—kHz’.
e Enter the desired frequency with the digit keys (6).
As soon as you have entered the last digit, the tuner selects
this frequency and the station becomes audible.. |
e Entry of the tuning frequency will automatically be interrup-
ted if no key is pressed for 90 seconds, or if a key other than
the digit keys is pressed. The receiver will return to the
previous frequency.
With the TUNING UP A / DOWN V keys
e Keep the TUNING UP A or DOWN V key (7) pressed down
until you approach the required frequency.
e |f you now briefly press TUNING UP A or DOWN V the fre-
quency will be changed by one step each time until the right
frequency has been reached or until optimum reception is
obtained. If the station found is strong enough, the word
TUNED appears on the display.
PRESET STATIONS
You can store 30 preferred stations in the memory of the tu-
ner. This enables you to find your favorite stations quickly and
easily. The preset numbers can be selected with the digit keys.
Programming of preset stations
Press the MEMORY key (13) to open the memory. The word
MEMORY starts flashing on the display.
Tune either automatically or manually to the frequency to be
stored (as described under TUNING)
If the display shows no preset number, the frequency oe
has not yet been stored in the memory.
Select a memory location number (1 up to 30) with the digit
keys (when selecting a 2-digit number, press the second
digit key within 1.5 seconds).
Press the MEMORY key (13) again to enter the frequency in
the memory. MEMORY disappears from the display.
A stored frequency is erased from the memory by storing
another frequency in its place.
Tuning to preset stations
Select the desired preset number with the digit keys (6)
(when selecting a 2-digit preset station, press the second
digit key within 1.5 seconds).
You will now receive the selected station and the display will
show the preset number, the tuned frequency or the station
name.
Preset stations can also be selected with the tuning + or —
keys (7):
First, select the TUNER with the CURSOR MODE keys (18).
Press + briefly to select the next preset number.
Press — briefly to select the previous preset number.
lf you keep + or — pressed down for more than 0.5 seconds
the preset number will be increased (or decreased) every 0.5
second.