EasyManua.ls Logo

Philips FW-C399 - Set Wiring Diagram

Philips FW-C399
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Basic Functions
.....F q:
m
i
@
@ @
© © ®
©5©
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Plug and Play
Plugand Play allows yoHto s_oreall availabe
RDS stations and radio stations aHTomatically
First time setup/power up
| When you turn o_the main supply "Hf,Z_,
TNSTRLL PF?ES_ PLRU"is displayed
2 Press •|1 on the system to start installation.
'-_ "TNS T_LL" is displayed, _llowed by "T U_'£ F_"
and "RUT B"
-_ PROG starts flashing¸
-_ The system will automatically store the radio
stations with sufficient signal stren£th, stsrting
from all RDS stations and followed by FH and
[4W bands respectively Weak P,DS stations m_
be stored in later presets¸
-_ When all the available radio stations are
stored or the memory _r 40 presets are usec
the last pres_ r_dio station ,for the first available
RDS station) will be played¸
3 The system will proceed to s_ the P,DS clock iF
the first preset is an RDS station¸
,-_ "TN_ TF_LL" is displayed, _llowed by "TT_I£"
and"5_F_£1/ _?_ TT_I£"
-_ When P,DS time is read, "_?_ YTf1£" is
displayed and the current time will be stored¸
-_ If RDS star on does no: transmit RDS tme
withn 90 seconds, the programme will ext
automat cally and the display will show"NO P,_S
IFthefirstpr_se-isnonRDSstatior,;
The pro%amine will exit automaticall_
To reinstall Plug and Play
1 In standby or demonstration mode, press and
hold •ll on the system u_il "_UT_ _IJgTRLL
- PF_£ScJ PLRU" is displayed¸
2 P_ss |1 _gain to start installation¸
-_ All previously stored radio stations will be
replaced
To exit without storing the Plug and Play
P-oss on the system
-_ If yoH do not comple*e the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again
N0tes:
When the power is turned on, the disc tray may
open and close to initialise the system.
If no stereo frequency is detected during
Plug and Play, "L llELl_ RN T[NNfI" wilI be
displayed.
During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
12
pg 001-030/C399/34-Eng 12 _ 12/24/01, 11:49 AM] 139 115 21241

Other manuals for Philips FW-C399

Related product manuals