Tape Operation/Recording
To select another track during recording
| Press •11 to interrupt mcordin£
2 PressI_1or •l to selectthe desired track
3 p-oss •11 to resume recordin£
To stop recording
• P-oss •
-_ Recordingand disc playbackwill s_op
simultaneously
Dubbing tapes
| Load the prerecorded tape in tape deck 1
• You can set the tape to the desired passage
where recording will start
2 Pross DUBBING
-) Playing and record r_gwill start s rTlUltar eously
--) "_U_" is displayed
Dubbin S of tapes is possible on one side of the
tape only To continue record ng on the reverse
side, a: the end of side A, flip the tape to side B
and repeat the procedure
To stop dubbing
Prss •
No_e5:
Dubbing of ropes is possible only from tape
deck I to tape deck 2.
To ensure good dubbing, use tapes of tbe same
length.
You can listen to another source wbile dubbing.
External Sources
Nozes:
All the sound control features (DSC or DBB, for
example) are available for selection.
Refer to tile operating instructions for the
connected equipment for details.
Listening to external sources
1 Connect the audio out term rials of the external
equipment (TVVCR, Laser Disc player DVD
player or CD Recorder) tothe AUX/CDR IN
term rials of your system
2 Press AUX to select external equpmeht
-1_ "/_Ux" or ,,r _?,, is displayed
For Recording, please refer to "Tape
OperationlRecordlng".
24
pg 001-030/0399/34-Eng
24 12/24/01,11:50AM3139 115 21241
To Next Page
Loading...
