Clock/Timer
IMPORTANT!
When in Eco Power standby mode, it is not
possible to operate the clock or timer
function.
View clock
The dock (if it is se_) will be sl,own in standby
mode
To view the clock in any source mode
(CD orTUNER for example)
• Press CLOCK*TIMER
-> The cock is disp ayed for a few seconds
-_ Iftfl_e clock has not been s_t, "............" is
d splayed
Clock setting
The clock can be set it, either 12hour or
24 hour mode (%', Ic':b_"or %_:L]L]"fur
example)
1 Ir_standby o_-view dock mode, press
CLOCK,TIMER once In other sorce mode,
press CLOCK,TIMER twice
2 Press PROGRAM repeatedly to select cock
mode
-> "/_ ', Ic' [J;;" or ";,;;:[J_" starts flashir,g
3 Press <41 or INp or, tP,e system repeatedly to set
the ho_:
4 Press NI or _ on the system repeatedly to set
the minute
Press CLOCK,TIMER again to store the
setting
-> The clock starts working
To exit without storing the setting
Press • on the system
Notes_
- The clock setting wilt be cancelled when the
power cord is disconnected or if a power failure
OCCUI'S.
- During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
- To set the clock automatically through the time
information in the RDS signal, refer to "Radio
Reception - Setting the RDS clock".
pg 001-030/0399/34-Eng
25
25
12/24/01,11:50AM3139 115 21241
To Next Page
Loading...
