CD Operation
Programming the disc tracks
Programm ng tracks is possible wPen p ayback is
stopped Up to 40 tracks can be storod n the
meTqory in any orde/:
| Load the desired discs on the dsc tray (relur to
"Loadin 8 d sos")
2 Press PROGRAM to start programmm£
-_ PROGstarts f:sshin£
3 Press CD or DISC 1/2/3 to select a disc
4 Press I_1 or _1 repeatedly to select the desired
track
5 Press PROGRAM to store the track
• Repeat steps 3-5 to store other discs and
tracks
6 To end prodrammms, press• once
-_ PROGssays and the prodramme mode
-omsins active.
-Ib The total nmber of tracks programmed and
the total payin S tme are d splayed
7 To start programme plax press _l|
-_ "/SLF/S _s/!8_£_£_I" is displayed
To review the programme
• Stop playback and press HI or _1 repeatedly
• Fo exit review mode, press • •
Erasing the programme
Press • once when p ayback is stopped or-
twice durn 8 p ayback
-_ PROG disappears and "_:'_?r_J£JR_1EL_RR_E_ "
isdisplayed
_0te;
The programme will he erased when the system
is disconnected from the power supply or when tile
disc tray is opened.
For Recording, please refer to "Tape
OperatlonlRecordlng",
_0tes;
- If the total playing time is more than "cJcJ:S cj,,
or if one of the programmed tracks has a number
greater than 30, then "- - : - - " is displayed
instead of the total playing time.
- If you attempt to programme more than 40
tracks, "I'UL L" is displayed.
- If you press any of the CD DIRECT I/2/3
buttons on the remote control, the system will play
the selected disc or track, and the stored
programme will be ignored temporarily. The _ROG
symbol also wilt disappear temporarily from the
display. It will reappear when playback of the
selected disc ends.
- During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automaticall_
18
pg 001-030/C399/34-Eng
18 12/24/01, 11:49 AM3139 115 21241
To Next Page
Loading...
