Troubleshooting
GENERAL
The system does not react when buttons Remove and recor_r_ectthe AC power plug and
are pressed, switch on the system adain
Sound cannot be heard or is of poor Adjust the volume
quality. D sconnect the headpl,or, es
Check tha: the speakers are connected correct}y
Check fthe str pped speaker wire s clamped
The left and right sound outputs are Check the speaker connections and Ioca* on
reversed.
The remote control does not function
properly.
The timer is not working,
Not all lighted buttons are showing light.
The Clock/Timer setting is erased,
The system displays features
automatically and buttons start flashing.
Select the source (CD orTUNER, for example)
beforepressi%the function button ( I_, I_l, I_1)
Reduce tP'e d stance between the remote centre
and the system
Insert the batter es with their polarities
(_ signs) aligned as ndica*ed
Replace the batteries
Point the remote control directly towards tPe IR
s@,so _
Set the clock correctly
Press and hold CLOCK'TIMER to switch on the
timel:
If recording or tape dubbing s in pro%ess, stop
recording
Press DIN NODE to seect DIN OFF d splay
mode
Power has been interrupted or the power cord
has been d sconnected Reset the clocldtimer
Press and hold • on the system to switch off
the demonstration
30
pg 001-030/0399/34-Eng
3O 12/24/01, 11:51 AM3139 115 21241
To Previous Page
Loading...
