ENGLISH
7
to the user on the control panel LCD display (chapters "LCD Display War-
nings").
NEVER remove the drip tray when the machine is on. Wait for a couple of
minutes after turning on/o , as the machine will be carrying out a rinse/
self-cleaning cycle (see section "Rinse/Self-Cleaning Cycle").
2
Remove the water tank from its seat.
3
Rinse and ll it with fresh water, making sure that the (MAX) level
indicated in the tank is not exceeded. Place the tank back in its place
by pushing it until its limit stop (the external pro les must match.
Fill the tank only with fresh, non-sparkling water. Hot water or any other
liquid may damage the tank and/or the machine. Do not operate the ma-
chine without water. Make sure there is enough water in the tank.
4
Remove the co ee bean hopper lid.
Note: The hopper may be provided with di erent safety features according to
the regulations applicable in the country of use of the machine.
5
Slowly pour the co ee beans into the hopper.
Only co ee beans must be put into the co ee bean hopper. If ground
co ee, instant co ee or any other object is put in the co ee bean hopper, it
may damage the machine.
6
Reposition the co ee bean hopper lid.
7
Insert the plug into the socket on the back of the machine.
8
Insert the plug of the other end of the cable into a wall socket with
suitable power voltage.
1
1
2
2
To Next Page
Loading...
