8
ENGLISH
9
Switch the power button to "I" to turn on the machine.
BlackOrangeOrange
The display shows the Stand-by icon.
10
To turn on the machine simply press the " " button.
The display indicates that the circuit must be primed.
Circuit Priming
In order to avoid that any water is left in the circuit for a long time, before
starting the machine for the rst time, and after long periods of inactivity,
the water circuit needs to be primed. This is because we want to o er you a
perfect and fresh product.
1
To prime the water circuit, place a container under the Cappuccinatore.
2
Select "START" by pressing the " " button. The machine starts the
automatic priming of the circuit by letting out a pre-set quantity of
water through the Cappuccinatore. The bar under the icon shows the
operation progress.
When the process is complete, the machine stops dispensing automa-
tically.
The display shows the machine warm-up icon, as shown in the gure.
To Next Page
Loading...
