26
ENGLISH
Brew Group
Brew Group - Weekly Cleaning
The brew group should be cleaned every time the co ee bean hopper is lled or
at least once a week.
1
Turn o the machine by pressing the power button and remove the
plug from the socket.
2
Remove the co ee grounds drawer. Open the service door.
4
Remove the brew group: Pull it by the handle and press the «PUSH»
button. The brew group must be washed only with lukewarm water
with no detergent.
5
Wash the brew group with lukewarm water and carefully wash the
upper lter. Before placing the Brew Group in its housing, make sure
there is no water left in the brewing chamber.
6
Make sure the brew group is in the rest position; the two reference
signs must match.
If they do no match, proceed as described in step (7).
3
Remove and clean the co ee residues drawer.
To Next Page
Loading...
