Philips HD8841 - Automatic Rinse;Self-Cleaning Cycle; Manual Rinse Cycle

14 ENGLISH
Automatic Rinse/Self-Cleaning Cycle
When warm-up has been completed, the machine automatically performs
a rinse/self-cleaning cycle of the internal circuits with fresh water. This
takes less than a minute.
5
Place a container under the co ee dispensing spout to catch the small
amount of water which will be dispensed.
6
The machine performs an automatic rinse cycle. Wait for the cycle to
 nish automatically.
Note:
If necessary, the cycle can be stopped by pressing the “
” button.
Yellow
7
When the operations described above have been completed, the ma-
chine shows this display. You can now perform the manual rinse cycle.
Manual Rinse Cycle
During this process you activate the co ee brewing cycle and fresh water
 ows through the steam/hot water circuit. This takes a few minutes.
1
Place a container under the co ee dispensing spout.
GreenGreen