40
ENGLISH
Cleaning of the Water Tank
1
Remove the small white lter or the “INTENZA+” water lter (if in-
stalled) from the water tank and wash it with fresh water.
2
Put the small white lter or the “INTENZA+” water lter (if installed)
back in its housing by gently pressing and turning it at the same time.
3
Fill the water tank with fresh water.
Weekly Cleaning of the Classic Milk Frother
The weekly cleaning is more thorough, since you need to disassemble all
the Classic Milk Frother components.
The following cleaning operations are required:
1
Remove the external part of the Classic Milk Frother. Wash it with luke-
warm water.
Daily Cleaning of the Classic Milk Frother
It is important that you clean the Classic Milk Frother daily or after each use
as this preserves hygiene and ensures perfect milk froth consistency.
After frothing milk, a small quantity of hot water must be dispensed into a
container.
Remove the external part of the Classic Milk Frother and wash it with
lukewarm water.
To Next Page
Loading...
