16
ENGLISH
8
Press the “ ” button to start dispensing hot water.
Red
9
Dispense water until the no water icon appears.
Note:
If necessary, the cycle can be stopped by pressing the “
” button.
10
At the end of this operation, ll the water tank again up to the MAX
level.
11
Now the machine is ready to brew co ee.
The display on the left will be shown.
Note:
The automatic rinse/self-cleaning cycle starts when the machine has been
in stand-by mode, or turned o , for more than 15 minutes.
When you have not used the machine for 2 or more weeks, you will need to
perform a manual rinse cycle.
At the end of the cycle, you can brew a co ee.
GreenGreen
To Next Page
Loading...
