20
ENGLISH
4
Put the “INTENZA+” water lter into the empty water tank. Press it
down until it cannot move any further.
5
Fill the water tank with fresh water and put it into the machine.
6
Dispense all the water in the water tank by using the hot water func-
tion (see the “Hot Water Dispensing” chapter).
7
Fill the water tank again.
8
Press the “ ” button and scroll the options by pressing the “ ” but-
ton until this display is shown.
YellowYellow Yellow
10
Press the “ ” button to select “ON” and press the “ ” button to con-
rm.
Yellow
11
To exit, press the “ ” button.
9
Press the “ ” button to access the function.
12
The machine shows this display and is ready to brew.
The machine has now been programmed to inform the user of
the need to replace the “INTENZA+” water lter.
GreenGreen
To Next Page
Loading...
