43
ENGLISH
43
7
Thoroughly wash the brew group with lukewarm water and carefully
clean the upper lter.
Caution:
Do not use detergent or soap to clean the brew group.
8
Let the brew group air-dry thoroughly.
9
Thoroughly clean the inside of the machine using a soft, dampened
cloth.
10
Make sure that the brew group is in the o position; the two reference
marks must match. If they do not match, proceed as described in step
11.
11
Gently pull down the lever until it is in contact with the brew group
base and the two reference marks on the side of the brew group
match.
12
Press the “PUSH” button rmly.
To Next Page
Loading...
