Philips HD8841 - Rinse Phase

50 ENGLISH
Yellow
2
Remove the Classic Milk Frother from the steam/hot water wand.
3
Press the “ ” button until this display is shown.
4
Press the “ ” button to select the descaling function.
Yellow
Note:
If you press the “
” button by mistake, press the “ ” button to quit.
5
Remove the “INTENZA+” water  lter (if installed) from the water tank
and replace it with the small white original one.
6
Pour all the descaling solution into the water tank. Then  ll the water
tank with fresh water up to the CALC CLEAN level.
7
Put the water tank back into the machine.
8
Place a large container (1.5l) under both the steam/hot water wand
and the co ee dispensing spout.