27
EN
Selecting the Sound Mode
This unit can receive bilingual audio broadcasts.
You can switch between different audio by pressing
[AUDIO]. When you do a manual record of an
analogue or digital channel, only selected audio will
be recorded.
When the external input audio is a bilingual
broadcast, you can choose “Stereo” or “Bilingual” to
record on an HDD/DVD. This setting is only for
recording external input (AV1/AV2/AV3).
1 In stop mode, press [HOME]. Select
“General Settings” using [U \ D],
then press [OK].
2 Select “Recording” using [U \ D],
then press [OK].
3 Select “External Input Audio” using
[U \ D], then press [OK].
4 Select “Stereo” or “Bilingual” using
[U \ D], then press [OK].
5 Press [HOME] to exit.
Hint
• If you select “Stereo”:
Audio will be recorded as “stereo audio”.
• If you select “Bilingual”:
Audio will be recorded as “bilingual audio”. (See
“Setting Recording Language” on this page for more
detail.)
You can select either “Main” or “Sub” audio to record
a bilingual broadcast.
This setting is only for recording analogue channel.
1 In stop mode, press [HOME]. Select
“General Settings” using [U \ D],
then press [OK].
2 Select “Recording” using [U \ D],
then press [OK].
3 Select “Recording Language” using
[U \ D], then press [OK].
4 Select “Main” or “Sub” using
[U \ D], then press [OK].
5 Press [HOME] to exit.
Setting External Input Audio
HDDHDD
D
To Next Page
Loading...
