87
EN
You can change the order of the stored channels
according to your preference when you use
[PROGRAM + / –] by swapping positions of the two
channels.
1 Follow steps 1 to 2 in “Edit Channels
(DIGITAL)” on page 85.
2 Select the digital channel of which
you want to change the position
using [U \ D], then press [OK].
3 Select the channel you want to
replace with using [U \ D], then
press [OK].
• The two channels swap positions.
4 Press [HOME] to exit.
You can edit the digital channel names according to
your preference.
1 Follow steps 1 to 2 in “Edit Channels
(DIGITAL)” on page 85.
2 Select the digital channel for name
editing using [U \ D]. Then press
[RED].
• Name editing display will appear.
3 Edit the name using the
[Alphanumeric keypad].
•Press [Alphanumeric keypad] repeatedly until
the desired letter appears.
•Press [L \ P] to move the cursor left or right.
•Press [RED] to select alphabet or numbers.
•Press [GREEN] to select capital or lower case
letters.
•Press [YELLOW] to insert a space.
•Press [BLUE] to delete a letter.
4 After completion, press [OK].
5 Press [HOME] to exit.
Note
• You can enter up to 19 letters.
You can check the detailed information of the current
digital channel.
1 Follow steps 1 to 3 in “Auto Tuning
(DIGITAL)” on page 84.
2 Select “Signal Information” using
[U \ D], then press [OK].
• “Signal Information” display will appear.
3 Press [HOME] to exit.
• “Signal Information” is not available for
analogue channel and external input (AV1/AV2/
AV3/Digital Video (AV4)).
• “Signal Information” is also not available while
the Pincode input field for locked digital channel
is displayed.
Sort Channels (DIGITAL)
DIGITAL
Edit Channel Names
DIGITAL
S. No. Channel Name
1 Moving picture 576i 1
2 ITV1
3 ITV2
4 ITV3
5 Channel 4
6 E4 4
England Crystal Palace 562000kHz/8M
To Next Page
Loading...
