42
EN
Other modes
Refer to page 25 for the information on other modes.
Limitation (DVD to HDD):
• If a copy control signal is detected during
dubbing, the dubbing will be stopped.
Preparing for dubbing (HDD to DVD):
• Insert a recordable DVD.
Preparing for dubbing (DVD to HDD):
• Insert a disc to be dubbed.
• Discs dubbed with other devices may not be
dubbed.
This function lets you select one specific title from the
title list for dubbing.
Press [HDD] first.
1 Press [TITLE].
2 Select a desired title to be dubbed
using [U \ D \ L \ P], then press
[OK].
3 Select “Dubbing” using [U \ D],
then press [OK].
4 Select “Yes” using [U \ D], then
press [OK].
Now you can operate your DVC with the remote
control of this unit.
To stop the dubbing in progress:
Press [STOP C] on the front panel.
Press [C (STOP)] on the remote control.
1 In stop mode, press [HOME].
2 Select “Dubbing” using [U \ D],
then press [OK].
3
Select “HDDADVD” using [U \ D],
then press [OK].
Select “DVDAHDD” using [U \ D],
then press [OK].
e.g.) HDDADVD
4 Select “Add Title” using [U \ D],
then press [OK].
• If you have registered any dubbing before, they
will be listed in the dubbing title list.
Before Starting Dubbing
One-Title Dubbing
HDDHDD
D
To Next Page
Loading...
