40
EN
1DV icon
2 Indicator of active device
• With “Control” highlighted, press [OK] to display
the available devices to control with the remote
control of this unit. Select the device you want to
operate using [U \ D], then press [OK].
- Select “HDD” / “DVD” to control this unit with the
remote control of this unit.
- Select “DVC” to control your DVC with the
remote control of this unit.
3 Recording audio mode
• “DV Audio” can be changed. With “DV Audio”
selected, press [OK] to display “DV Audio”
menu. Select the audio you want to output using
[U \ D], then press [OK].
- Select “Stereo1” to dub the stereo sound.
- Select “Stereo2” to dub the sound that was
added after the recording.
- Select “Mix” to dub the stereo1 and stereo2.
4 Command menu
• “Start Rec” or “Pause Rec” will appear.
5 External input channel
6 Product name of your DVC
• If the unit cannot recognise the input signal from
the DVC or if it is the unknown product, “No
Device” or “****” will appear instead.
7 Status of the current operation and the
time counter
Each icon means (Available icons may vary
depending on the DVC):
• The actual speed varies depending on your digital
video camera.
Digital Video Camera to HDD /
DVD Dubbing
Before recording from DVC, see page 19 for
connection instructions.
If you are dubbing to the HDD, press [HDD] first.
If you are dubbing to a disc, press [DVD] first.
1 Select “AV4 (DV-IN)” channel using
[PROGRAM + / –] or [SOURCE] and
[PROGRAM + / –].
2 Press [REC MODE] to select a
recording mode. (See page 25.)
3 Press [DISPLAY].
4 With “Control” highlighted, press
[OK] to display the available devices
to control with the remote control of
this unit. Select “DVC” using
[U \ D], then press [OK].
e.g.) DVC to DVD dubbing
Now you can operate your DVC with the remote
control of this unit.
5 Press [B (PLAY)] to start playing
back the DVC, and find where you
want to start dubbing.
Press [C (STOP)] when it comes to
the desired start point.
The following instructions are described with
the operations using the remote control of this
unit.
DVC is in stop mode.
DVC is in playback mode.
DVC is in pause mode.
DVC is fast forwarding. (standard speed)
DVC is fast forwarding. (faster than above)
DVC is fast forwarding. (faster than above)
DVC is slow forwarding. (standard speed)
DVC is slow forwarding. (faster than above)
DVC is slow forwarding. (faster than above)
DVC is fast forwarding. (without picture)
DVC is fast reversing. (without picture)
DVC is fast reversing. (standard speed)
DVC is fast reversing. (faster than above)
DVC is fast reversing. (faster than above)
DVC is in slow reverse playback.
DVC is in recording.
DVC is in recording pause mode.
Please also read the operating instructions of
your DVC for more information.
Preparing for DV dubbing (DVC to HDD):
• Make sure your DVC is in video mode.
Preparing for DV dubbing (DVC to DVD):
• Insert a recordable DVD.
• Make sure your DVC is in video mode.
HDDHDD
D
To Next Page
Loading...
