35
EN
Timer Recording Using the
VIDEO Plus+
®
System
You can program the timer using the VIDEO Plus+
programming numbers that are printed in your local
TV guide magazine (analogue channel only).
1 In stop mode, press
[the VIDEO Plus+ button].
VIDEO Plus+ Programming window will appear.
• If you have not set the clock, the clock setting
window will appear instead. In such a case,
continue from step
4 in “Manual Clock Setting”
on page 89 before programming the timer
recording.
• If the “Timer Programming” list is full, the “Timer
Programming” mode is activated instead of the
VIDEO Plus+ programming mode.
•
Press
[TIMER]
in the
VIDEO Plus+
programming
mode to switch to the “Timer Programming” mode.
•Press [the VIDEO Plus+ button] to exit.
2
Set the VIDEO Plus+ programming
number of the programme you want to
record using [Alphanumeric keypad],
then press [OK].
• You can clear one letter by pressing [L] and all
the letters by pressing [CLEAR].
3
Select the desired recording frequency
using [
U \ D
], then press [OK].
Once:
To record a TV programme once, as you set.
Daily:
To record a TV programme at the same time on
the same channel everyday.
Mon-Fri:
To record a TV programme at the same time on
the same channel from Monday through Friday.
Weekly:
To record a TV programme at the same time on
the same channel every week.
4 If “---” appears for recording
channel, select a recording channel
using [U \ D], then press [P].
• If the channel linking to the VIDEO Plus+ code
is installed in the unit, its preset number will be
indicated in the menu.
• If your local channel information is not
programmed in the unit’s memory, “– – –” may
appear.
• If you select the channel number using [U \ D],
it is stored in the unit’s memory (only analogue
channels). If not, “---” may appear.
• If necessary, correct the information as you
wish.
5 Press [TIMER] when all information
required is entered.
You can overwrite the existing title from the
beginning.
1 Load the disc that includes a title to
be overwritten.
Title list will appear.
If the title list does not appear, press [TITLE].
2 Press [REC MODE] to select a
recording mode.
Refer to “Recordable Discs” on page 25.
3 Use [U \ D] to select a title to be
overwritten, then press [OK]
4 Use [U \ D] to select “Overwrite”,
then press [OK]
5 Select the channel you want to
record.
HDDHDD
D
To Next Page
Loading...
