44
EN
Protecting a Disc
To prevent accidental over-recording, editing or
erasing of recordings, you can protect them using
Disc Protect Function.
Insert a recordable disc.
1 In stop mode, press [HOME].
2 Select “Disc Editing” using [U \ D ],
then press [OK].
3 Select “Disc Protect OFF A ON”
using [U \ D], then press [OK].
4 Select “Yes” using [U \ D], then
press [OK].
The disc is protected.
Note
• You can select only “Disc Protect ON A OFF” when
a protected disc is inserted.
To cancel the disc protect:
• Select “Disc Protect ON A OFF” at step 3, then
select “Yes”.
• If you insert a disc protected with this unit, “Disc
Protect ON A OFF” will appear instead of
“OFF A ON”.
Finalising Discs
You will need to finalise discs to play them back in
other units.
Finalising may take between several minutes and an
hour.
A shorter recording period on the disc will require a
longer time period for finalisation. Do not unplug the
mains cable during finalisation.
Insert a recordable disc before
finalising.
1 In stop mode, press [HOME].
2 Select “Disc Editing” using [U \ D],
then press [OK].
3 Select “Finalise” using [U \ D], then
press [OK].
4 Select “Yes” using [U \ D], then
press [OK].
e.g.) DVD-RW disc
Finalising will start.
To cancel finalising (DVD-RW disc only):
At step 4, press [C (STOP)]. Select “Yes” using
[U \ D], then press [OK]. Finalising is cancelled
and the unit switches to stop mode.
If “ ” appears when [C (STOP)] is pressed, you
cannot cancel finalising because the finalising has
already reached at a critical point in its process.
If “No” is selected and [OK] or [BACK U] is
pressed, finalising is continued.
You cannot cancel finalising a DVD+R and
DVD-R disc once it has started.
5 Finalising is complete.
DVD+RWDVD+RW D
To Next Page
