56
EN
You can assign a specific point on a disc to return
later.
1 During playback, press [DISPLAY].
2 Select the icon using [L \ P],
then press [OK] within 1 second, or
wait for 1 second to display the
marker list.
e.g.) Marker setup menu for DVD-Video
3 Select the desired marker number
using [U \ D]. When the disc
reaches the desired point, press
[OK].
The title (track) number and the time are
displayed.
4 To return to the marker, select the
desired marker number using
[U \ D], then press [OK].
Hint
• To clear a marker, select the marker number you
want to clear, then press [CLEAR].
• You can mark up to 6 points.
Note
• All markers are erased when you perform the
following operations.
- Opening the disc tray (CD/DVD only)
- Turning off the power (CD/DVD only)
- Making additional recording on the disc (DVD only)
- Editing any title (DVD only)
- Dividing the title (HDD only)
- Deleting a scene of the title (HDD only)
• Marker setting is not available when you play back
the Video CD with PBC function.
To play back a title being recorded while
continuing to record:
You can play back from the beginning of a title that is
currently being recorded to.
1 During recording, press [B (PLAY)].
Playback of the title you are recording will start
from the beginning.
• Elapsed playback time will be displayed on the
front panel display.
2 To stop the playback, press
[C (STOP)] once
.
The front panel display will switch back to show
the elapsed recording time.
If you press [C (STOP)] twice
, it will stop the
recording.
Note
• You can also use the special playback functions
such as [D (FFW)], [E (REV)] etc. during
chasing playback mode.
• [I (RECORD)] is invalid during FlexTime function.
• You can no longer fast forward the playback when it
comes to a few seconds before the current
recording point.
To play back previously recorded title:
You can continue recording a programme while
playing back another title in the same component
(HDD).
1 During recording, press [TITLE].
2 Select a desired title using
[U \ D \ L \ P], then press
[B (PLAY)].
3 To stop the playback, press
[C (STOP)] once
.
The front panel display will switch back to show
the elapsed recording time.
If you press [C (STOP)] twice
, it will stop the
recording.
To playback a title being recorded while
continuing to record, refer to “To play back a title
being recorded while continuing to record:”
(available only with HDD).
Note
• Video CD, Audio CD, MP3/JPEG files recorded on a
disc and DivX
®
files can also be played back during
HDD recording.
Marker Setup
HDDHDD
D
To Next Page
Loading...
