Philips HDR3800 - Page 70

70 EN
Lock/ Unlock a disc
Prevent recordings from being accidentally
erased or edited by locking the recordable DVD.
Note
If the disc is locked, this option will change to
[ Unlock ].
•
1 Press HOME.
2 Select [ Settings ], then press OK.
3 Select [ Disc ] > [ Lock ], then press OK.
A confi rmation message is displayed.
To cancel, select [ Cancel ], then press
OK.
4 To proceed, select [ OK ], then press OK.
The disc is locked.
To unlock a disc
1 Press HOME.
2 Select [ Settings ], then press OK.
3 Select [ Disc ] > [ Unlock ], then press
OK.
A confi rmation message is displayed.
To cancel, select [ Cancel ], then press
OK.
4 To proceed, select [ OK ], then press OK.
The disc is unlocked.
5 To exit the setup menu, press the Blue
button [ Exit ].
Prepare a DVDRW for playback
See chapter ‘Edit Recordings – Play your
recordings on other players’.

•


•

View disc information
Displays the current disc information.
1 Press HOME.
2 Select [ Settings ], then press OK.
3 Select [ Disc ] > [ Disc Info ], then press
OK.
The disc information is displayed.
[ Label ]
Name of the disc.
[ Title No. ]
Total number of titles on the disc.
[ Media ]
Disc type.
[ Status ]
The status of the disc (recordable, blank,
fi nalised or full).
[ Space ]
The capacity of the disc used for recording.
[ Remainder ]
The remaining time available for recording
on the disc. It is dependent on the selected
mode of recording quality.
4 To return to the setup menu, press BACK.
5 To exit the setup menu, press the Blue
button [ Exit ].

hdr3800_31_eng_29522.indd 70hdr3800_31_eng_29522.indd 70 2008-07-18 11:46:18 AM2008-07-18 11:46:18 AM