78 EN
Restore default settings
This setting resets the recorder to factory
default settings.
Note
After the reset, the initial setup is required. •
1 Press HOME.
2 Select [ Settings ], then press OK.
3 Select [ System ] > [ Restore default ],
then press OK.
A confi rmation message is displayed.
To cancel, select [ Cancel ], then press
OK.
4 To proceed, select [ OK ], then press OK.
Once complete, the recorder switches
off, then restarts. (See chapter ‘Get
Started - First Time settings’).\
•
Manage Easylink settings
Notes
Your TV and other connected deivices must be
compliant with HDMI CEC.
Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
•
•
Enable Easylink
Before you start...
You must switch on the HDMI CEC operations
on your TV/devices to enjoy the EasyLink
controls. See your TV/devices manual for
details.
1 Press HOME.
2 Select [ Settings ], then press OK.
3 Select [ Misc ] > [ Easylink ], then press
X.
4 Select an option and press OK.
[ On ]
Enable HDMI CEC compliant TV/devices
to control each other with a single remote
control.
[ Off ]
Disable the feature.
5 To exit the setup menu, press the Blue
button [ Exit ].
hdr3800_31_eng_29522.indd 78hdr3800_31_eng_29522.indd 78 2008-07-18 11:46:18 AM2008-07-18 11:46:18 AM
To Next Page
Loading...
