Philips HDR3800 - 12 Additional Information; Upgrade Software

80 EN
12 Additional
Information
Upgrade software
The software installed in your recorder is
continuously being refi ned for greater stability
and compatibility of the set. Periodically, Philips
issues upgrades for the software which you can
copy onto your USB fl ash drive to install on
your recorder.
Caution!
Power supply must not be interrupted during
upgrade!
•
Check the software version
1 Press HOME.
2 Select [ Settings ], then press OK.
3 Select [ Misc ] > [ Version Info ], then
press OK.
The software version of the recorder is
displayed.
4 To return to the setup menu, press BACK.

Copy upgrade information
Note
When checking for the latest software upgrade,
please also check for any accompanying instructions
on installing the software.
•
1 Insert a USB fl ash drive to the USB socket
on the front panel of the recorder.
2 Press HOME.
3 Select [ Settings ], then press OK.
4 Select [ Misc ] > [ Product Support ], then
press X.
5 Select [ Copy to USB ], then press OK.
A confi rmation message is displayed.
To cancel, select [ Cancel ], then press
OK.
6 To proceed, select [ OK ], then press OK.
The information is copied to the USB
fl ash drive.
7 Once copying completes, press OK and
remove the USB fl ash drive.
8 Plug the USB fl ash drive to a personal
computer with internet access.
Select the html fi le and you will be
directed to a web page to download
the latest software.
9 Follow the on-screen instructions and
download the required software.

•


hdr3800_31_eng_29522.indd 80hdr3800_31_eng_29522.indd 80 2008-07-18 11:46:19 AM2008-07-18 11:46:19 AM