88 EN
No surround sound output
on HDMI connection.
It depends on your TV audio capabilities. In this case, connect
COAXIAL DIGITAL OUT of this recorder to your TV or AV
amplifi er receiver. Disable the HDMI audio output.
•
Play
Disc does not play. Insert the disc with the label facing up.
Wrong region code. The DVD must be coded for ALL regions
or Region 2 for playback on this recorder.
There is no recording on the disc or it is a wrong disc type. See
chapter “Play - Play video”.
Ensure that the disc is not scratched or warped. Clean the disc
or replace a new one.
Check if the disc is defective by trying another disc.
•
•
•
•
•
Unable to play DivX movies Check that the DivX fi le is encoded according to the ‘Home
Theatre Profi le’ mode with DivX encoder.
Check that the DivX movie downloaded is a complete fi le.
•
•
A DVDR/ DVDRW
recorded on this DVD
recorder does not play on a
DVD player.
If a recording is too short, it is possible that a DVD player
cannot detect it. Please follow the minimum recording times for
each recording mode : [ HQ ] – 5 mins, [ SP ] – 10 mins, [ SPP ]
– 13 mins, [ LP ] - 15 mins, [ EP ] – 20 mins, [ SLP ] – 30 mins.
You have to fi nalise the DVDR. See chapter “Edit Recordings -
Play your recordings on other DVD Players”.
•
•
The message ‘UNKNOWN
DISC’ is displayed.
This message may appear if you insert a disc that may have
encountered one of the following:
Error during recording: the title may be missing.
Error while changing the title/ index picture: the original
title/ index picture may be visible.
Error during the fi nalisation of the disc or the disc has not
been fi nalised.
•
•
•
•
hdr3800_31_eng_29522.indd 88hdr3800_31_eng_29522.indd 88 2008-07-18 11:46:20 AM2008-07-18 11:46:20 AM
To Next Page
Loading...
