Philips HR2355 - Troubleshooting Advanced Issues

17
Problem Cause Possible solution
The appliance
stops during
processing, then
the indicators are
ashing quickly,
and the alarm
sounds.
The mixing paddle can
be blocked by some
foreign objects.
Disconnect from the power, clean the
noodle maker, and follow the user
manual again to restart the noodle
making.
The dough can be too
dry.
The wrong program is
selected.
Too much leftover
dough inside the
chamber.
The our is either
exposed to moisture
before use, or the dough
is too wet.
Keep your our dry during storage.
Follow the user manual to restart the
noodle making.
The chamber, the mixing
paddle, the shaping disc
are not cleaned properly
before use.
Make sure all parts are clean before
use.
The mixing paddle or the
chamber is still wet.
Make sure all parts are dry before use.
The water is not pour in
the right time.
Follow the user manual to make
noodle.
The our type is not
suitable.
Incorrect servings was
selected.
Select the extrusion-only program.
Small amount of
water is leaking
out from the
appliance.
The method to pour
water is incorrect.
Follow the user manual to make
noodle.
The mixing paddle
is running idle,
and there is no
noddle coming
out.
The ratio of the our and
water is incorrect.
Disconnect from the power, clean the
noodle maker, and follow the user
manual again to restart the noodle
making.
EN