EasyManuals Logo

Philips LX8500W User Manual

Philips LX8500W
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
English
7
3139 115 23232
Step 1: Assemble the
speakers
Connections
Step 2: Placing the speakers
and AV subwoofer
matching
coloured
stickers
1
2
1
1
3
3
4
2
PHILIPS
PHILIPS
Front speaker
(Left)
Front speaker
(Right)
AV Subwoofer Rear speaker
(Right)
Rear speaker
(Left)
DVD System
Centre speaker
For best possible surround sound, all the
speakers (except AV subwoofer) should
be placed at the same distance from the
listening position.
1 Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.
2 Place the centre speaker above the TV or
the DVD system so that the centre
channel’s sound is localised.
3 Place the rear speakers at normal
listening ear level facing each other or
hang on the wall.
4 Place the AV subwoofer on the floor near
the TV.
Helpful Hints:
–To avoid magnetic interference, do not
position the front speakers too close to your
TV.
Allow adequate ventilation around the
DVD system/AV subwoofer.
1 Look for the matching color sticker at
the bottom of the speakers and on top of
the speaker stands before attaching them.
2 If you want to disconnect speaker from
the speaker stand, use a sharp end object
(e.g. pen) to slot into the small hole at
the rear of the speaker stand while
pulling up the speaker.
Helpful Hints:
– Red colour stickers for front right and
white colour stickers for front left.
–Grey colour stickers for rear right and blue
colour stickers for rear left.
001-045-LX85-69-Final copy 24/08/2004, 11:13 AM7

Table of Contents

Other manuals for Philips LX8500W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips LX8500W and is the answer not in the manual?

Philips LX8500W Specifications

Sound Specifications IconSound Specifications
D/A converter24 bit, 96 kHz
frequency response30-48000 Hz
signal to noise ratio>95 dB
output power (RMS)3 x 100W, 2 x 75W + 150W
total sound power (RMS)600 W
satellite speaker frequency range120-50000 Hz
satellite speaker impedance6 ohm
center frequency range120-30000 Hz
center speaker impedance6 ohm
subwoofer frequency range30-120 Hz
subwoofer impedance4 ohm
Power IconPower
power supply110-240V, 50/60 Hz
standby power consumption< 1W
Weight and Dimensions IconWeight and Dimensions
center speaker dimensions435 x 76 x 70 mm
center speaker weight1.4 kg
packaging dimensions1000 x 516 x 495 mm
set dimensions360 x 40 x 305 mm
set weight2.5 kg
stand dimensions95 x 540 x 95 mm
subwoofer dimensions300 x 400 x 300 mm
subwoofer weight12 kg
surround speaker dimensions100 x 550 x 107 mm
surround speaker weight10.3 kg
weight including packaging43 kg

Related product manuals