Philips OST690 - Connecting External Devices; Play from Bluetooth-enabled Device; Play from an External Audio Device

9 EN
Play from Bluetooth-enabled
device
Note
• The effective operating range between the system and
thepaireddeviceisapproximately10meters(30feet).
• Any obstacle between the system and the device can
reduce the operational range.
• Compatibility with all Bluetooth devices is not
guaranteed.
1 Rotate the source selector to the
BLUETOOTH position.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manualofthedevice).
3 When [OST690] is displayed on your
device, select it to start pairing and
connection.
» After successful pairing and connection,
the system beeps twice.
4 Play audio on your device.
» Audio streams from your device to this
system.
To disconnect the Bluetooth-enabled device:
• Deactivate Bluetooth on your device; or
• Move the device beyond the
communication range.
To clear Bluetooth pairing history:
Press and PROG together for 3 seconds.
» The current Bluetooth connection is
disconnected.
» After successful clearing, [CLR](clear)
blinks for 5 seconds, then [-] scrolls on the
display.
Play from an external audio
device
You can also listen to an external audio device
such as an MP3 player through this system.
1 Press to open the compartment.
2 Connect an audio cable (3.5mm, not
supplied)to:
• the AUDIO IN socket inside the
compartment.
• the headphone socket on an external
device.
» The system switches to Audio-in mode
automatically.
3 Play audio on the external device (see the
usermanualofthedevice).