Page 18 of 33
3. Click on the DPM/DT Configuration menu option.
a. Then click on DPM
Wizard.
b. Click on the Start
Wizard link found in
the right pane.
c. Click on DPM 9600
as the Select DPM
device type. Next
click [Ok].
9. At the Settings for DPM
screen, verify you have the
first two checkboxes
marked. Click [Next] to
continue.
10. At the Appearance screen, verify
that within the Display Mode the
‘Advance display’ is marked and
within the Lower Area that ‘File
name’ is selected. Click [Next] to
continue.
To Next Page
Loading...
