Philips Pronto - Selecting IR to Operate Your Devices

User Guide
36
Selecting IR to Operate your Devices
1 Press the left hard button below the touch screen for
3 seconds.
The Tools menu appears.
2 Tap RF IR in the Tools Menu.
The ‘RF IR Tool’ screen appears.
3 Tap .
The Device Overview appears.
4 Tap the Device for which you want to select IR.
The ‘Select IR or RF’ screen appears. RF is selected in the Sending Signals list.
5 Choose IR in the Sending Signals list.
The ‘Define RF’ button is disabled.
6 Tap .
Pronto will send out IR signals for the selected device.
Using the Power Features
ProntoII upd.qxd 08-11-2002 09:02 Pagina 36