Philips S8A - Managing Paired Devices and PIN

14 EN
3 Select [Privacy mode], then press [OK] to
conrm.
4 You can select among these 3 options:
• [Off] : no PIN/passcode is required to
access the mobile's phonebook which
is always available for viewing.
• [Auto range] : no PIN/passcode
is required to access the mobile's
phonebook which is available for
viewing only when the mobile phone is
within the Bluetooth range.
• [PIN] : follow the on-screen instruction
to activate or change the PIN/
passcode.
Note
• After turning [Auto range] off, your contacts are visible
without PIN, even if the phone is not connected. Make
sure you either delete the phonebook or enable PIN
protection if you want to continue to have privacy
protection of your contacts.
Manage the mobile phones
list
You can manage your mobile phones list in this
way:
1 Select [Menu] > > [Device list], then
press [OK] to conrm.
» The mobile phones list is displayed.
2 Select a mobile phone, press [Option].
3 Select [Connect]/[Disconnect]/[Delete]/[
Delete all], then press [OK] to conrm.
Note
• You can see [Disconnect] in the option list only when
the mobile phone is connected; and [Connect] only
when the mobile phone is disconnected.
Connect/Disconnect the mobile
phone
1 Select [Menu] > > [Device list], the
press [OK] to conrm.
» The mobile phones list is displayed.
2 Select a mobile phone, press [Option].
3 Select [Connect]/[Disconnect], then press
[OK] to conrm.
» The selected mobile phone is
connected to/disconnect from
Bluetooth.
Delete a device/Delete all devices on
the list
1 Select [Menu] > > [Device list], then
press [OK] to conrm.
» The mobile phones list is displayed.
2 Select a mobile phone, press [Option].
3 Select [Delete]/[Delete all], then press
[OK] to conrm.
Note
• If you select to delete all mobile phones on the list,
a conrmation message is displayed. Press [OK] to
conrm.
Change the PIN/passcode
1 Select [Menu] > > [Change PIN], then
press [OK] to conrm.
2 Press [Clear] to remove the current PIN/
passcode to conrm.
3 Enter the new PIN/passcode, then press
[OK] to conrm.
» The new PIN/passcode is saved.