16 EN
7 Calls
Note
• When the power fails, the phone cannot access
emergency services.
Tip
• Check the signal strength before you make a call or
when you are in a call (see 'Check the signal strength'
on page 12).
Make a call
You can make a call in these ways:
• Normal call
• Predial call
• Call through the speed dial key
You can also make a call from the redial list (see
'Redial a call' on page 28), phonebook list (see
'Call from the phonebook' on page 24) and call
log (see 'Return a call' on page 26).
Normal call
1 Press or .
2 Dial the phone number.
» The number is dialed out.
» The duration of your current call is
displayed.
Note
• Make sure that the line settings are set to [Home]
for the landline. For information, see chapter 'Phone
settings', section 'Line settings'.
Tip
• If you select [Auto] on the handset, the idle line is
pre-selected for an outgoing call, with [Home] as the
highest priority, then [Mobile 1] and [Mobile 2]. If
you select [Manual], select an icon among these three
options.
Predial call
1 Dial the phone number
• To erase a digit, press [Clear].
• To enter a pause, press and hold .
2 Press / to select the landline or mobile
line ( / / ) from which you want to
make an outgoing call.
3 Press or to dial out the call.
Note
• Make sure that the Line settings are set to [Home] for
the landline or [Mobile 1]/[Mobile 2] for mobile line.
For information, see chapter 'Phone settings', section
'Line settings'.
Tip
• If you select [Auto] on the handset, the idle line is
pre-selected for an outgoing call, with [Home] as the
highest priority, then [Mobile 1] and [Mobile 2]. If
you select [Manual], select an icon among these three
options.
Call through the speed dial key
You can assign and save the number of your
contact to a key (see 'Set the speed dial keys'
on page 24). Then you can press and hold
on the key in standby mode to dial the saved
phone number automatically.
To Next Page
Loading...
