16
English
Step 1: Place the handle on the plugged in charging stand.
Step 2: Press and hold power on/off button for:
EasyStart Brush head
replacement
reminder
Pressure Sensor
Feedback
Up to 3 seconds Up to 5 seconds Up to 7 seconds
¯ ¯ ¯
Step 3: Let go of the power on/off button when you hear:
1 beep 1 beep and then
2 beeps
1 beep, 2 beeps and
then 3 beeps
¯ ¯ ¯
If you see the battery indicator and the brush head
replacement reminder light flash green 2 times and hear 3
tones from low to high, then the feature has been activated.
OR
If you see the battery indicator and brush head replacement
reminder light flash amber 1 time and hear 3 tones high to
low, then the feature has been deactivated.
To Next Page