Philips Sonicare ProtectiveClean 5300 - EasyStart, SmarTimer, and Feature Customization

15
English
3
When the brush head replacement reminder indicator
lights up amber, you should replace your brush head.
All smart brush heads come with the brush head
replacement reminder feature activated. To deactivate
the brush head replacement reminder see 'Activating or
deactivating features'.
EasyStart
This Philips Sonicare model comes with the EasyStart
feature activated. The EasyStart feature gently increases
the power over the first 14 brushings to help you get
used to brushing with the Philips Sonicare.
Disclaimer
When the Philips Sonicare toothbrush is used in clinical
studies, it must be used in clean mode at high intensity
with the handle fully charged and the EasyStart feature
deactivated.
To deactivate EasyStart (see 'Activating or deactivating
features').
SmarTimer
The SmarTimer indicates that your brushing cycle is
complete by automatically switching off the toothbrush
at the end of the brushing cycle.
Dental professionals recommend brushing no less than 2
minutes twice a day.
Note: If you press the power on/off button after you
started the brushing cycle, the toothbrush pauses. After a
pause of 30 seconds, the SmarTimer resets.
Activating or deactivating features
You can activate or deactivate the following features of
your toothbrush:
- EasyStart
- Brush Head Replacement Reminder
- Pressure Sensor Feedback
Note: You can only activate or deactivate the brush head
replacement reminder when a smart brush head is on the
handle.