Philips Digital Photo Frame
Operating the PhotoFrame
EN - 21
1. When in Single view, press to enter Zoom view.
2. Press repeatedly to zoom in the selected picture.
3. When the OSD toolbar disappears, press / / /
to move to a particular area you want to see.
Playing a slideshow
1. When in Single view, press to enter Slideshow view.
2. Slideshow of pictures automatically starts.
3. During the slideshow, you can press to copy the picture
shown currently to the Favorite disk area in the internal
memory.
4. To pause the slideshow and enter Single view, press . To
re-start the slideshow, press again.
Rotating a picture automatically
The PhotoFrame has a built-in tilt sensor that allows auto rotation
of pictures. Follow the instructions below to enable auto rotation.
1. When the PhotoFrame is placed in horizontal position, rotate
the PhotoFrame 90 degrees clockwise to enable auto rotation.
2. When the PhotoFrame is placed in vertical position, rotate the
PhotoFrame 90 degrees counterclockwise to enable auto
rotation.
The auto rotation feature displays pictures in a landscape or portrait
view. It does not re-orient pictures that were taken sideways.
To Next Page
Loading...
