16 EN
Wireless connection: Enter IP address
manually
Stop getting Auto IP
1
network.
»
address assigned by the Wi-Fi network
automatically.
2 Press BACK on the remote control to
stop getting auto IP.
Get the IP address of the router
Consult the user manual of the router.
enter the IP address (e.g. 192.168.1.1) in
the web browser (e.g. Internet Explorer)
information in the setup page.
NP3300
Acquiring IP address...
Press <Back> to enter
IP address manually
Enter the IP address manually
On the NP3300
allows the unit to be in the same subnet as
the router.
255.255.255.000;
IP address: 192.168.1.XX (where XX denotes a
Press / repeatedly to select the entry
location;
alphanumeric buttons on the remote
control; or press
/ repeatedly.
Note
Ensure that you never enter an IP address that is
already assigned to a computer/device on the network.
Wired connection
Connect to the router by using the Ethernet
cable
NP3300
To Next Page
Loading...
