Philips T Series User Manual

32BDL3651T/43BDL3651T
41
Bind status:
(1). If the device does not have appropriate network
connection, a message “Network is disconnected” will
appear.
(2). If the device is equipped with network function, but is
not connected to the remote control server, a message
“Server is disconnected” will appear.
(3). If a server is connected, but not bound, a message “Server
is unbinded” will appear.
(4). If the device is bound with the server successfully, a
message “Server is binded” will appear.
(5). If the PIN code is not correct, a message “Error PIN code”
will appear.
SNMP
Enable/Disable SNMP service.
Please refer to the SNMP user manual.
ADB over Network
You can access ADB over a network connection with port 5555.
6.1.2.3. Source Settings
Settings -> Signage Display -> Source Settings
User can congure source APK’s detailed options.
Media Player
Settings -> Signage Display -> Source Settings -> Media Player
Open Media Player APK’s edit play list activity and edit eect
settings activity.
Browser
Settings -> Signage Display -> Source Settings -> Browser
Open Browser APK’s bookmark editor activity.
Kiosk
Settings -> Signage Display -> Source Settings -> Kiosk
Open Kiosk APK’s bookmark editor activity.
Kiosk
Edit Kiosk
CMND & Play
Settings -> Signage Display -> Source Settings -> CMND & Play
CMND & Play APK settings activity
(1). Server
Set up CMND & Play Server IP address. Not available in 2.0
protocol.
(2). Account
Set up CMND & Play Server account, account format should
be [a-z] [A-Z] [0-9]. Not available in 2.0 protocol.
(3). PIN Code
Set up CMND & Play PIN code. Not available in 2.0 protocol.
(4). Version
Set up CMND & Play server protocol version.
(1). 2.0: Used for protocol version 2.0/2.2 (default)
(2). 3.0: Used for protocol version 3.0/3.1 (default when user
selects JP language in OOBE)
(5). Content
CMND & Play APK supports playback content from internal
storage (select “Internal Storage”) and external storage
(select “SD card” or “USB storage”). CMDN & Play APK will
search content from the selected storage. The default
setting is internal storage.
Please note that external storage cannot be removed (plug-
out) when CMND & Play is playing content. In addition, the
free disk space of the external storage must be double of
the CMS le size for extracting CMS content.
PDF Player
Settings -> Signage Display -> Source Settings -> PDF Player
Open PDF Player APK’s edit play list activity and edit eect
settings activity.
Custom app
Settings -> Signage Display -> Source settings -> Custom app
User can set up customer source APK. The selected APK will
be launched when switching into customer input source. If
customer source APK is not set, the system shows a black screen
when switching to customer input source.
Default is “CMND&Deploy” APK.
If a custom source APK is set, the APK name will be displayed.
Otherwise, it means that the custom App has not been set.

Philips T Series Specifications

General

Brand	Philips
Model	T Series
Category	Monitor
Language	English