Philips T Series User Manual

32BDL3651T/43BDL3651T
53
HDMI One Wire Power O
Allow user to set multiple devices to standby mode by
pressing the power button. This function is only available
when HDMI CEC is enabled.
Auto signal detection
OPTION:
{O}, {All}, {Failover}
{O}: Disable Auto signal detection
{All}: HDMI1 -> HDMI2 -> HDMI3* -> HDMI4* -> DVI**
-> DP* -> VGA* -> OPS* -> Media Player -> Browser ->
SmartCMS -> Kiosk -> Custom
* not all modules have all source in this list. DVI can be DVI-I
or DVI-D
* MediaPlayer, Browser will only try playlist index 1
{Failover}:
Failover 1: HDMI1 (default)
Failover 2: HDMI1 (default)
Faliover 3: HDMI1 (default)
Failover 4: HDMI1 (default)
Failover 5: HDMI1 (default)
Failover 6: HDMI1 (default)
Failover 7: HDMI1 (default)
Failover 8: HDMI1 (default)
Failover 9: HDMI1 (default) *
Failover 10: HDMI1 (default) *
Failover 11: HDMI1 (default) *
* not all modules have all 11 failover list, depands on totoal
source of module
Language
Select the language used in the OSD menu.
The options are: English/Deutsch/
简体中文
/Français/
Italiano/Español/Pyccкий/Polski/Türkçe/
繁體中文
/
日本語
/
Português/العربية/Danish/Swedish/Finnish/Norwegian/
Dutch/Czech/Lithuanian/Latvian/Estonian.
OSD Transparency
Adjust OSD transparency.
• {O} - Transparency o.
• {1-100} - Transparency level 1-100
Power Save
Mode 1 [TCP o, WOL on, auto o]
Mode 2 [TCP o, WOL on, auto on/o]
Mode 3 [TCP on, WOL o, auto on/o]
Mode 4 [TCP on, WOL o, no auto on/o]
Power
Save
RCU Power
Button O
No Signal WOL Android
(ARM)
Mode 1 DC OFF DC OFF V ARM o
Mode 2 DC OFF when signal is back,
system wake up
V ARM o
Mode 3 Backlight
OFF
when signal is back,
system wake up
X ARM on
Mode 4 Backlight
OFF
Backlight always on,
show no signal
X ARM on
Following table is the action for Android board with
dierent power mode.
Power mode Mode 1, Mode 2 Mode 3, Mode 4
DC o System shutdown 1. Media Player, Browser, PDF
Player and SmartCMS will
close.
2. Android system goes to
default black launcher.
DC on System boot up Android system reboot. If
Logo settings is o, system
directly turn backlight on
without rebooting.
Advanced option reset
Reset all settings except {Date and Time} in the advanced
option menu to factory preset values.
7.3. Android Settings
Open Android Settings
1. When enabled admin password from Android Setting ->
System tools, it must enter the password before entering the
android settings.
Default password is 1234.

Philips T Series Specifications

General

Brand	Philips
Model	T Series
Category	Monitor
Language	English