Philips TAB5105 - Using Your SoundBar Features; Volume Control and Muting

EN 9
Option 3: Connect to HDMI (ARC)
Socket
YourSoundbarsupportsHDMIwithAudio
ReturnChannel(ARC).IfyourTVisHDMI
ARC compliant, you can hear the TV audio
through your Soundbar by using a single
HDMIcable.
1
 UsingaHighSpeedHDMIcable,
connect the HDMI OUT (ARC)-TO TV
connector on your Soundbar to the
HDMI ARC connector on the TV.
• TheHDMI ARC connector on the
TV might be labeled differently. For
details, see the TV user manual.
2
 OnyourTV,turnonHDMI-CEC
operations. For details, see the TV user
manual.
NOTE:TheTVaudiooutputmustbe
set to PCM.
4 Use your
SoundBar
This section helps you use the SoundBar to
play audio from connected devices.
Before you start
• Makethenecessaryconnections
describedintheQuickStartGuideor
download the User Manual from
www.philips.com/support.
• SwitchtheSoundBartothecorrect
source for other devices.
Adjust the volume
1
Press +/- (Volume) to increase or
decrease a volume level.
• Tomutesound,press .
• Torestorethesound,press
again or press +/- (Volume).
Volume indicator
• Whenyoupressthevolume+to
increase the volume, the SoundBar's
indicator will blink red, and the volume
will return to the normal state after
it reaches the maximum with the
SoundBar's indicator showing solid red
for 2 seconds.
• Whenyoupressthevolume-to
decrease the volume, the SoundBar's
indicator will blink red, and the volume
will return to the normal state after
it reaches the minimum with the
SoundBar's indicator showing solid red
for 2 seconds.