Service Modes, Error Codes, and Fault Finding
EN 18 TPM5.1E LA5.
2011-Sep-02
How to Navigate
With the up/down cursor keys can be used to navigate through
the menu, while with the Left/Right cursor the values can be
changed.
How to EXIT
Choose “EXIT”, and press the “OK” button. Turn “Off” the TV
via the side control key and then turn “On” the TV again.
Notes: (only applicable to xxHFL3232D/10)
• When the Hotel mode is active, the service modes CSM,
SDM, SAM and ComPair are automatically disabled (this is
to prevent hotel guests entering Philips service modes).
• In order to use the service modes and ComPair, Hotel
mode must be disabled.
• To enable/disable the hotel mode, the hotel setup remote
(green remote) is needed.
31 YPBPR_PHASE 0 - 255 InValid InValid InValid InValid 480i, 480p, 576i, 576p, 720p 50 Hz,
720p 60 Hz,1080i 25 Hz,1080i 30 Hz,
1080p 24 Hz,1080p 50 Hz,1080p 60 Hz
32 AUD_GAIN_LINEIN 0 - 36 22 23 23 23 Audio gain by different sources
33 AUD_GAIN_HDMI 0 - 36 22 22 22 22 Audio gain for HDMI inputs
34 AUD_GAIN_ATV 0 - 36 22 23 23 23 Audio gain for analogue TV signals
35 AUD_GAIN_DTV 0 - 36 22 22 22 22 Audio gain for digital TV signal
36 AUD_GAIN_USB 0 - 36 22 22 22 22 Audio gain for the USB input
37 AUD_LIPSYNC_SPK -272 - +272 200 250 250 100 Audio delay to the speaker, “+” is delay, “-” is ahead. NVM value
= Delay (ms)/0.147
38 AUD_LIPSYNC_HP -272 - +272 200 250 250 100 Audio delay to the head-phone, “+” is delay, “-” is ahead. NVM
value = Delay (ms)/0.147
39 AUD_LIPSYNC_SPDIF -272 - +272 200 250 250 100 Audio delay to the S/P-DIF output, “+” is delay, “-” is ahead. NVM
value = Delay (ms)/0.147
40 Tuner_ID 95 95 95 95 Tuner Identification, 94: NXP 95: LG
41 OPT AV2 Scart2 0, 2 0 2 2 2 0: not available, 2: CVBS + YC
42 OPT HDMI2 0/1 1 1 1 1 On/Off
43 OPT Reset Option 0/1 Press OK Press OK Press OK Press OK after reset, should restart the set immediately
44 Esticker NVM 1 0 - 61, 255 32 32 32 32 0~61: Icon number. 255: no icon
45 Esticker NVM 2 0 - 61, 255 79 40 40 40 0~61: Icon number. 255: no icon
46 Esticker NVM 3 0 - 61, 255 87 25 25 25 0~61: Icon number. 255: no icon
47 Esticker NVM 4 0 - 61, 255 85 35 35 35 0~61: Icon number. 255: no icon
48 Esticker NVM 5 0 - 61, 255 45 45 45 45 0~61: Icon number. 255: no icon
49 Esticker NVM 6 0 - 61, 255 2 65 65 65 0~61: Icon number. 255: no icon
50 Esticker NVM 7 0 - 61, 255 58 2 2 2 0~61: Icon number. 255: no icon
51 Esticker NVM 8 0 - 61, 255 48 48 48 48 0~61: Icon number. 255: no icon
52 Esticker NVM 9 0 - 61, 255 82 58 58 58 0~61: Icon number. 255: no icon
53 Esticker NVM 10 0 - 61, 255 64 64 64 64 0~61: Icon number. 255: no icon
54 Esticker NVM 11 0 - 61, 255 86 76 76 76 0~61: Icon number. 255: no icon
55 Esticker NVM 12 0 - 61, 255 76 77 77 77 0~61: Icon number. 255: no icon
56 Esticker NVM 13 0 - 61, 255 71 71 71 71 0~61: Icon number. 255: no icon
57 Esticker NVM 14 0 - 61, 255 70 74 74 74 0~61: Icon number. 255: no icon
58 Esticker NVM 15 0 - 61, 255 74 78 78 78 0~61: Icon number. 255: no icon
59 Esticker NVM 16 0 - 61, 255 72 70 70 70 0~61: Icon number. 255: no icon
60 Esticker NVM 17 0 - 61, 255 78 72 72 72 0~61: Icon number. 255: no icon
61 Esticker NVM 18 0 - 61, 255 255 255 255 255 0~61: Icon number. 255: no icon
62 Esticker NVM 19 0 - 61, 255 255 255 255 255 0~61: Icon number. 255: no icon
63 Esticker NVM 20 0 - 61, 255 255 255 255 255 0~61: Icon number. 255: no icon
64 Esticker Reset Press OK Press OK Press OK Press OK Executing this resets the e-sticker
65 Exit_Factory Press OK Press OK Press OK Press OK Exit factory mode
Number Action Items Range Default Value Description
Smart Choice Dali
32" 32" 42" 47"
To Next Page
Loading...
