EN 39
Connect with iPhone
Step 1: Download and install the APP, open it directly and connect as
prompted;
Step 2: If open the APP directly, you will be prompted with "Mobile phone's
Bluetooth not turned on", turn Bluetooth on in Settings, or via shortcut; if
Bluetooth is turned on, when you open the APP you will be prompted with
"Device not found, please tap Search";
Step 3: ID number pops up when you tap Search, e.g. “PHILIPS_VTR5102_
XXXX”, manually select Connect, if there is not ID number for the search,
please select “re-search device”. After connected successfully, the device is
ready for use once "Connected" appears on the interface.
To Next Page
Loading...
