USB/SD/MMC MP3 Playback
1. Loading SD/MMC card
Open the panel and insert the SD/MMC card into the slot. Close the panel,
the unit will read the le of the card automatically.
2. Take out SD/MMC card
Push SRC button to non-SD mode, press the SD/MMC card to pop out.
Take out the card.
* The panel cannot close if the SD/MMC card was not fully inserted or did
not remove after pop it up.
3. Loading USB device
Insert USB device into the USB jack. The unit will read the le in the USB
device automatically.
4. Take out USB device
Press the SRC button to non-USB mode and take out the USB device from the USB jack.
USB/SD/MMC Notes
USB functions (ash memory type) MP3 music play
1. SD/MMC card support.
2. USB ash memory 2 in 1 (SD/MMC ) support.
3. Support FAT 16 & FAT 32.
4. File name: 32 byte/dir name: 32 byte/tag name: 32 byte. 5. Tag (ID3 tag ver 2.0)
Title/Artist/Album: 32 byte support.
6. Multi card reader not support.
7. USB 1.1 support.
USB 2.0 support (it can not support USB 2.0 speed. Just, get be same speed with USB 1.1).
Not all kinds of USB devices are compatible with the unit.
To Next Page
Loading...
