machine is suggested for 30 minutes. The actual situation is determined by the
model design.
• Operational precautions & safety advice
About the machine:
Operate the space of the machine, keep the environmental temperature at 20-30°
C, and keep it ventilated. If it is printed overnight, do not turn off the air
conditioner.
Resin operation:
Avoid contact with sunlight when using resin. It can be operated for a short time
under normal light source (less than 10 minutes).
After use, please filter and seal in the bottle to avoid exposuring in the air.
It is suggested not to mix the new material and the used material. Please shake it
before use.
To Next Page
Loading...
