Aftertreatment
• Cleaning: Soak the model in more than 95% alcohol and place it in the
ultrasonic machine for 30 seconds before removing it. If the structure is
complicated, the process can be repeated 2 or 3 times, the soaking time
should not be too long to avoid the model cracking.
• • Air drying: Dry the model by placing the model in a cool place for
more than 30 minutes
• Second curing: The curing mode is cured by a secondary curing lamp. The
curing time is determined by the intensity of the light source. Generally, the nail
lamp issuggested for 3-5 hours, and the Phrozen Cure professional curing
To Next Page
Loading...
