Phrozen Transform User Manual

Phrozen Transform Operating
Instruction
Congratulations on joining the Phrozen 3D printer. When you receive the Phrozen
Transform, please check the contents of the package inside of the box.
General content includes：
• Phrozen Transform Printer * 1 pc
• Print stage and resin tank * 1 set
• Print Accessibility Tool Set
o Soft scraper * 1 pc
o Hard scraper * 1 pc
o Funnel * 1 pc
o Gloves * 1 set
• Black power cord * 1 pc
If you have any missing component or problems, please contact the Phrozen team
directly

Phrozen Transform Specifications

General

XY Resolution	76 µm
Z Resolution	10 µm
Connectivity	USB, Ethernet
Technology	LCD
Type	Resin 3D Printer
Materials	405 nm UV resin
Operating System	Phrozen OS
Touchscreen	Yes
Build Volume	292 x 165 x 400 mm
Layer Thickness	0.01 - 0.3 mm
Printing Speed	Up to 3 cm/hour
Software	CHITUBOX
Material Compatibility	405nm Resins
Power Input	100-240 V, 50/60 Hz

Summary

Initial Machine Setup

Powering On the Device

Connect the power cord and turn on the switch to start the system.

Z-Axis Calibration

Performing the Calibration Process

Follow steps to adjust the printing stage for accurate Z-axis positioning.

When to Recalibrate

Understand the timing for recalibration after initial setup or maintenance.

File Management and Printing

Uploading Files via USB

Transfer 3D model files from computer to the printer using a USB drive.

Print Preview and Initiation

Review print settings and start the printing process after file import.

Shutdown and Resin Handling

Machine Shutdown Procedure

Steps to safely turn off the machine and disconnect power.

Resin Removal and Storage

Properly remove, filter, and store leftover resin after printing.

Post-Print Processing and Safety

Model Cleaning and Curing

Steps for cleaning prints with alcohol and performing secondary curing.

Operational and Resin Safety

Guidelines for safe machine operation and handling of printing resin.

Software Operation and Slicing

Downloading and Installing Software

Acquire and install the necessary Phrozen slicing software.

System and Print Settings

Configure system preferences and printing parameters within the software.

Importing and Preparing Models

Import STL files, generate, and edit support structures for models.

Slicing and Exporting Files

Slice models into layers and export them for the printer.

Third-Party Slicing Software Use

Instructions for using alternative slicing software for model preparation.