11_09
Unscrew the fastening nuts and remove the internal rim.
Reinstall the internal rim on the spare wheel by thoroughly tightening the fastening
nuts.
11_10
Make sure that, where the spare wheel touches the hub, everything is clean and that
there are no impurities that might lead to a wrong fastening of the nuts. Gradually lock
the fastening nuts after lowering the vehicle.
11_11
Install the wheel cup by making it click into the corresponding grooves.
CAUTION
A WRONG INSTALLATION OF THE WHEEL CUP MAY CAUSE ITS DETACHMENT
WHILE THE VEHICLE IS RUNNING.
64
To Next Page
Loading...
